One (1) Cantilever Lo-Lift Beam Leg Drilling Mast with a minimum clear height of 157’-0" x 30’-0" wide base and a rated static hook load of 1,000,000# on twelve (12) lines strung to the traveling block per API 4E-4F Q1 Specifications. Mast is designed for 100 mph wind load with a full rack of pipe and 115 mph on a bare mast. In addition, the mast has a 1,000,000 lbs. casing capacity simultaneous with 800,000 lbs. setback capacity. Mast stem portal truss are designed affording excellent driller’s view and is complete with raising sheaves, A-frames, and sling lines. Sling lines remain in back face of mast when not in use. Mast will accommodate a 35’-0" high drill floor and has full height straight ladder, from drill floor to crown. The mast will be provided with pad eyes for fixation of an intermediate tubing stabbing board at an intermediate level. (Intermediate Tubing Stabbing Board included.)
One (1) Hydraulic Snubbing System installed in A-frames allows driller to have full control of break-over during raising and lowering operations of mast. Wireline and truck snubbing is not required.
One (1) 600-Ton (12 Line) Crown Block with six (6) 60" minimum diameter cluster sheaves and a 60" minimum diameter fast line assembly, all with tapered roller bearings and grooved for 1-3/8" diameter wireline. Cluster assembly is mounted on a crown frame which includes line guards, oak bumper blocks with expanded metal safety screen and pad eyes to accommodate two (2) 6-ton cat line sheaves, one (1) ten-ton core line sheave, one (1) for hanging the traveling block and one (1) for hanging air hoist. Crown safety platform for crown service with 3’-6" high handrails, checkered plate flooring and safety gate at ladder opening is included. Each sheave is lubricated by individual grease channels and zerks located on one end of the shaft. Complete with one (1) 12,000 lbs. capacity rotating jib crane. Block and tackle included.
One (1) Heavy Duty Racking Platform with a capacity for 240 stands of 5-1/2" drill pipe and 10 stands of 8" to 9-1/2" drill collars. Platform is complete with folding diving board, access catwalk and fold-up floor slab for driller’s side. Platform is adjustable from 77’-0" to 87’-0" above drill floor. Handrails are 7’-0" high constructed of 2" square tubing with toe plates. Also includes a bracket at the platform with one (1) new Ingersoll Rand model BU7A or equal air winch for pulling back drill collars, complete with safety chains.
One (1) Belly Board complete with handrails and toe boards.
One (1) Geronimo Derrickman Escape System including wireline, base anchor, hand brake and "T" type riding seat.
One (2) Set of Eight (8) Standpipe Clamps for dual 5" nominal diameter standpipes located on driller’s side.
Two (2) Air Hoist Sheave Unit 14" OD steel sheave grooved for 5/8" diameter wireline (or 1-1/2" manila rope) and mounted on bronze bushings. Swivel and shackle are included.
Two (2) Cat line Sheave Units 16" OD steel sheave grooved for 5/8" diameter wireline (or 1-1/2" manila rope) and mounted on bronze bushings. Swivel and shackle are included.
One (1) Coreline Sheave Unit 24" OD steel sheave grooved for 9/16" diameter wireline and mounted on roller bearings. Swivel and shackle are included.
One (1) Set of Leveling Equipment for leveling all four points of mast at floor elevation using hand pump, including one (1) 100-ton jack, 2" thick shim packs for each leg, and extra long A325 bolts. (Only one jack required).
Two (2) Tong Counterweights each have a capacity of two (2) tons and complete with water buckets, guide tracks, 8" snatch blocks, and wireline with swedged sockets.
Two (2) Cat line Booms 20’-0" long with 5,000# capacity each installed on both sides of mast, complete and including sheaves grooved for 5/8" line, safety latches and all necessary support and lift lines.
One (1) Mast Stand 12’-3: high to support crown while pinning racking board including oak block headrest.
Two (2) Mast Assembly Stands 6’-0" high to support mast bottom during assembly.
Support Material to mount deadline anchor in mast bottom section. (Dead line anchor to be furnished by others).
One (1) Universal Casing Stabbing Board is adjustable from 20’-0" above drill floor to 50’-0" above drill floor and is complete with access ladder and one (1) 1000 lbs. air powered hoist with controls and attachment brackets. The air hoist is equipped with over-speed sensor, load brake and damage cable sensor, two (2) additional safety locks with speed sensors are provided independent of the main load brake. At an elevation above the stabbing board a derrickman harness, with shoulder straps and safety line attachment pad eyes, will be provided. This stabbing board will be designed, fabricated and tested in accordance with API 4F - Q1.
One (1) Lo-Lift Self-Elevating Substructure with a 30’-0" high x 35’-0" wide x approximately 35’-0" long drill floor. Drill floor is supported by 8’-0" wide x 6’-0" high x 41’-0" long welded box sub-bases on both sides. Cross tie members are included to hold sub-bases apart during assembly and erection. Structure is designed to accommodate an electric drawworks (1320-UE or equivalent). Drawworks and surrounding floor are raised to drilling position by use of drawworks power and mast raising lines.
No other rigging or wireline is required. Mast raising lines need only be moved from A-frame sheaves to sheaves on drill floor elevator to complete rigging for erection.
Torque Tube Elevating System keeps floor at consistent level during erection. All bracing and support material while in erect position is included.
Welded Box Sub-Bases have built-in easy access window 2’-0" x 2’-0" on driller’s side for air, water and BOP closing line entry. Mast and A-frame shoes are built into sub-bases. A-frames fold into sub-bases for transport with minimum transport height of 9’-6’. A-frame spreader is required. A-frames are erected with gin pole truck, thereby eliminating the need for cranes on location. Front sub-base extensions may be removed while drilling.
One (1) Parallelogram Type Setback Support is pinned to the mast while mast is horizontal and raises with the mast. Setback support is designed to support 800,000# of racked pipe simultaneously with 1,000,000# casing load. Setback area is recessed 6" for wood and includes 6" oak flooring.
Rotary Beams are designed for 37-1/2" independent rotary drive set flush with floor.
Set of ¼" Floor Plate and 3’-6" high handrails with toe plate for drill floor perimeter. All flooring, handrails and floor- mounted equipment are set in position at ground elevation and raised with the drill floor. The drawworks and the top of the Rotary are set flush with the floor.
One (1) V-Door Ramp and Combination Stair 6’-0" wide ramp is ½" plate down to 3’-6" catwalk elevation with framing continuing to the ground. Ramp has rails on both sides of 3" diameter pipe x 2’-0". Wide stair 2’-0" is on driller’s side with welded serrated bar grating treads and fixed handrail on driller’s side.
One (1) Set of Doghouse Supports on driller’s side for 8’-0" wide x 20’-0" long doghouse.
One (1) Personnel Lift 35’-0" electric powered with three (3) failsafe systems, 800# capacity complete with electric control safety locks on the lower and upper entry gates. The lift can be operated from the top as well as the bottom. Includes the necessary material to attach to substructure and upper location whether at the floor elevation or the dog house.
DRAWWORKS: NEW 2000 hp. A/C OR D/C DRIVE Grooved for 1-3/8" wire line.
2 each Electric Motors: GE-752-DC-1000 hp series draw works motor with 10 hp. blower motor. Brakes: Elmago Baylor 7838, Eddy Current Brake W/ Control System Nominal Torque Capacity @ 50 Rpm (with dual drawworks brake cooling system)
(4) EACH NEW 3512 CATERPILLAR GENERATOR SETS 1365 KW. SKID MOUNTED ON OILFIELD SKID WITH ROOF, SPARK ARRESTORS TAIL BOARDING FRONT AND REAR
SCR: NEW SERIES SYSTEM:
(4) ENGINE X 4 BAY SCR SYSTEM AIR CONDITIONED TO ACCOMMODATE TEMPERATURE OF 55 DEG-CELSIUS COMPLETE WITH DUST FILTERS COMPLETE WITH ALL A/C AUXILIARY EQUIPMENT CONNECTIONS:
ROTARY TABLE (RECONDITIONED)
37-1/2", 500 Ton, 0-200 Rpm Variable, With 3.842:1 Speed Ratio, 30,000 Ft. # @ 60Rpm with GE-752 1000 HP hi-torque motor and 10 hp blower motor..
MUD SYSTEM: (4) TANK APPROXIMATE 1800 BBL.
2 ea. (mud pumps 1600 hp ea. With suction and discharge manifolds, skid mounted on oil field skid 2 ea. Ge-752 1000hp .series drilling motors ea. Pump rear mounted with 10 hp dust control blowers
Two (2) Mission Model Magnum, 8 x 6 x 11 with 50 HP Electric Motors 1100 rpm, 230/460 Volt
MUD MIXING PUMPS
Four (4) Mission Model Magnum, 8 x 6 x 12 with 100 HP Electric Motors, 1800 rpm 230/460 Volt
MUD TANKS 1400BBL SYSTEM
(1) ea. 40’ x 10’ W x 8’ High 450 bbl. With 20 hp agitators
2 ea.-40’ x 10 W x 8’ wide, 450 bbl. With 20 hp agitators
(1) ea.40’ x 10 W’ x 8’ high, 450 bbl. With 20 hp. agitators
One (1) 50 BBL Capacity with Pit Level Indicator, (2) transfer pumps.
One (1) 75 BBL Capacity Slug Pit
Two (2, Height Speed Over Linear Motion, Triple Screen
(1) With 20 x 4" De-silter Cones with (3) three 10"in De Sander cones. Complete with (2) 100 hp 1800 rpm 6 x 8 centrifugal pumps
(2) Quincy screw type compressors x 50 hp units with air driers 125 psi.w/p. mounted in accumulator skid
(1) diesel cold start air compressor:
One (2) Air Tank 200 gallons: (1) one 200 gallon in substructure
Rig up and testing before delivery. Delivery in approximatly 200-230 days